tcp_stun_servers explicitly controls TCP STUN servers.
If tcp_stun_servers is not configured, TCP STUN falls back to configured stun_servers.
If neither is configured, TCP STUN uses the built-in default TCP STUN list.
Empty lists explicitly disable the corresponding STUN server list.
Empty CLI/env overrides now clear existing configured STUN servers instead of appending nothing.
* bench: add packet bytes extraction Criterion benchmark
Adds a Criterion benchmark under easytier/benches/ covering
ZCPacket::payload_bytes and tunnel_payload_bytes at 1280/4096-byte payload
sizes, using iter_batched so ZCPacket construction stays in the setup phase
and is excluded from the timed region.
- Register the [[bench]] entry in easytier/Cargo.toml.
- Document the bench and PACKET_BYTES_* env vars in benches/README.md.
* perf: reduce packet buffer slicing churn
Replace BytesMut::split_off with Buf::advance in ZCPacket bytes
extraction paths (payload_bytes, tunnel_payload_bytes, convert_type,
drop_foreign_header) and in TunZCPacketToBytes, and simplify the
copy_from_slice in new_from_payload.
When the buffer is in its unique (VEC) representation, split_off promotes
it to the shared (ARC) representation, allocating a Shared control block
and bumping the refcount on every call, and pins the buffer in shared
mode. advance only mutates the in-place ptr/len/cap fields, avoiding that
allocation/refcount churn on the TX hot path. The byte data itself is not
copied by either path.
Replace std::time::Instant with quanta::Instant on per-packet, per-RPC,
and per-session paths. TSC-based, ~5ns vs ~25ns per now() call.
Reuses the existing `extern crate self as hotpath` alias so
`use hotpath::instant::Instant;` resolves to the same quanta type with
or without the hotpath feature. Leaves tokio::time::Instant and
smoltcp::time::Instant untouched.
Handle TUN receive errors by marking the fake TCP stack closed and
clearing registered sockets instead of panicking.
Refuse new sockets on closed stacks and let listeners recreate stacks
when the reader task exits.
Discard malformed fake TCP frames instead of panicking so OpenWrt
nodes can survive unexpected or truncated packets.
Also emit the correct IPv6 ethertype and cover the parser with
round-trip and truncation regression tests.
Addresses issue #2016 where nodes behind unstable networks
(e.g. campus firewalls) cause excessive traffic that can freeze
the remote node.
Two changes in peer_ospf_route.rs:
- Make do_sync_route_info only trigger reverse sync_now when
incoming data actually changed the route table or foreign
network state. The previous unconditional sync_now created
an A->B->A->B ping-pong cycle on every RPC exchange.
- Add exponential backoff (50ms..5s) to session_task retry loop.
The previous fixed 50ms retry produced ~20 RPCs/s during
sustained network instability.
Normalize composite tunnel display values before rendering peer and
debug output so IPv6 tunnel types no longer append `6` to the port.
- Preserve prefixes like `txt-` while converting tunnel schemes to
their IPv6 form.
- Recover malformed values such as `txt-tcp://...:110106` into
`txt-tcp6://...:11010`.
- Reuse the normalized remote address display in CLI debug output.
Implement the previously stubbed connector add/remove CLI commands
using PatchConfig RPC with InstanceConfigPatch.connectors, and
remove the peer add/remove stubs that had incorrect semantics.
PeerCenterRpc was only registered in the per-instance peer-to-peer RPC
manager (domain = network_name), but not in the management API server
(domain = ""). The CLI connects to the management API with an empty
domain, causing "Invalid service name: PeerCenterRpc" errors.
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
When two EasyTier instances run on the same machine and share the same
network, the direct connector would expand a remote peer's 0.0.0.0
listener into local interface IPs and then attempt to connect to
itself, causing an infinite loop of failed connection attempts.
The existing `peer_id != my_peer_id` guard does not cover this case
because the two instances have different peer IDs despite sharing the
same physical network interfaces.
Fix by adding a self-connection check in `spawn_direct_connect_task`:
before spawning a connect task, compare the candidate (scheme, IP,
port) against the local running listeners. If a local listener matches
on all three dimensions — accounting for 0.0.0.0/:: wildcards by
checking membership in the local interface IP sets — the candidate is
silently dropped with a DEBUG log message.
The fix covers all four code paths:
- IPv4 unspecified (0.0.0.0) expansion loop
- IPv4 specific-address branch
- IPv6 unspecified (::) expansion loop
- IPv6 specific-address branch
The TESTING flag logic is untouched so existing unit tests are
unaffected.
* refactor(connector): replace is_self_connect closure with GlobalCtx::should_deny_proxy (#1954)
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Co-authored-by: Copilot <198982749+Copilot@users.noreply.github.com>
Addresses security vulnerabilities in axios <1.13.5. Updates the
declared specifier to ^1.13.5 in all three frontend package.json
files and regenerates both npm and pnpm lock files (resolved: 1.13.6).
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Magic DNS updates are full snapshots, so appending routes keeps old IPs and returns duplicate A records. Replace each client's previous routes on update and add a regression test to ensure hostname resolution keeps only the latest IP.
Prevent crashes when users input quic://...:0 by rejecting port 0 explicitly and propagating connect setup errors. Add a regression test to ensure invalid QUIC targets fail gracefully.
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
- drop low-priority columns when tables exceed terminal width
- truncate optional columns to fit remaining width
- add --no-trunc flag to disable truncation
- compute column widths using unicode display width
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
- Add short column names for latency, loss rate, rx/tx bytes, tunnel protocol and NAT type
- Format loss rate as percentage with one decimal place
- Change table style from modern to markdown for better readability
* refactor: update global context STUN server initialization
Modified global context initialization to use a single StunInfoCollector
instance with properly configured IPv4 and IPv6 servers instead of
creating separate instances.
feat: add IPv6 STUN server configuration support
Added interface methods and config struct fields to support both IPv4
and IPv6 STUN server configuration. Modified getter and setter methods
to handle Option<Vec<String>> type for both server types.
feat: enhance StunInfoCollector with IPv6 support
Updated StunInfoCollector to support both IPv4 and IPv6 STUN servers.
Added new constructor that accepts both server types and methods to set
them independently.
feat: add CLI argument for IPv6 STUN servers
Added command line argument support for configuring IPv6 STUN servers.
Updated configuration setup to handle both IPv4 and IPv6 STUN server
settings.
docs: add localization for STUN server configuration
Added English and Chinese localization strings for the new STUN server
configuration options, including both IPv4 and IPv6 variants.
fanyang