Easytier/easytier-proto/proto/common.proto

syntax = "proto3";

import "error.proto";

package common;

message FlagsInConfig {
  string default_protocol = 1;
  string dev_name = 2;
  bool enable_encryption = 3;
  bool enable_ipv6 = 4;
  uint32 mtu = 5;
  bool latency_first = 6;
  bool enable_exit_node = 7;
  bool no_tun = 8;
  bool use_smoltcp = 9;
  string relay_network_whitelist = 10;
  bool disable_p2p = 11;
  bool relay_all_peer_rpc = 12;
  bool disable_udp_hole_punching = 13;
  // string ipv6_listener = 14; [deprecated = true]; use -l udp://[::]:12345
  // instead
  bool multi_thread = 15;
  CompressionAlgoPb data_compress_algo = 16;
  bool bind_device = 17;

  // should we convert all tcp streams into kcp streams
  bool enable_kcp_proxy = 18;
  // does this peer allow kcp input
  bool disable_kcp_input = 19;
  // disable relay local network kcp packets
  bool disable_relay_kcp = 20;
  bool proxy_forward_by_system = 21;

  // enable magic dns or not
  bool accept_dns = 22;
  // enable private mode
  bool private_mode = 23;

  // should we convert all tcp streams into quic streams
  bool enable_quic_proxy = 24;
  // does this peer allow quic input
  bool disable_quic_input = 25;
  // disable relay local network quic packets
  bool disable_relay_quic = 35;

  // quic listen port
  uint32 quic_listen_port = 33 [deprecated = true];

  // a global relay limit, only work for foreign network
  uint64 foreign_relay_bps_limit = 26;

  uint32 multi_thread_count = 27;

  // enable relay foreign network kcp packets
  bool enable_relay_foreign_network_kcp = 28;

  // enable relay foreign network quic packets
  bool enable_relay_foreign_network_quic = 36;

  // encryption algorithm to use, empty string means default (aes-gcm)
  string encryption_algorithm = 29;

  // disable symmetric nat hole punching, treat symmetric as cone when enabled
  bool disable_sym_hole_punching = 30;

   // tld dns zone for magic dns
  string tld_dns_zone = 31;

  bool p2p_only = 32;

  bool disable_tcp_hole_punching = 34;

  bool lazy_p2p = 37;
  bool need_p2p = 38;
  uint64 instance_recv_bps_limit = 39;
  bool disable_upnp = 40;
  bool disable_relay_data = 41;
  bool enable_udp_broadcast_relay = 42;

  // Linux-only: SO_MARK (fwmark) value applied to every outbound underlay
  // socket (TCP/UDP/QUIC/WS/WG connectors and listeners). Unset = leave
  // SO_MARK untouched (kernel default 0). Any set value (including 0) is
  // applied via setsockopt. Requires CAP_NET_ADMIN; silently ignored on
  // non-Linux platforms.
  optional uint32 socket_mark = 43;
}

message RpcDescriptor {
  // allow same service registered multiple times in different domain
  string domain_name = 1;

  string proto_name = 2;
  string service_name = 3;
  uint32 method_index = 4;
}

message RpcRequest {
  RpcDescriptor descriptor = 1 [ deprecated = true ];

  bytes request = 2;
  int32 timeout_ms = 3;
}

message RpcResponse {
  bytes response = 1;
  error.Error error = 2;

  uint64 runtime_us = 3;
}

enum CompressionAlgoPb {
  Invalid = 0;
  None = 1;
  Zstd = 2;
}

message RpcCompressionInfo {
  // use this to compress the content
  CompressionAlgoPb algo = 1;

  // tell the peer which compression algo is used to compress the next
  // response/request
  CompressionAlgoPb accepted_algo = 2;
}

message RpcPacket {
  uint32 from_peer = 1;
  uint32 to_peer = 2;
  int64 transaction_id = 3;

  RpcDescriptor descriptor = 4;
  bytes body = 5;
  bool is_request = 6;

  uint32 total_pieces = 7;
  uint32 piece_idx = 8;

  int32 trace_id = 9;

  RpcCompressionInfo compression_info = 10;
}

message Void {}

message UUID {
  uint32 part1 = 1;
  uint32 part2 = 2;
  uint32 part3 = 3;
  uint32 part4 = 4;
}

enum NatType {
  // has NAT; but own a single public IP, port is not changed
  Unknown = 0;
  OpenInternet = 1;
  NoPAT = 2;
  FullCone = 3;
  Restricted = 4;
  PortRestricted = 5;
  Symmetric = 6;
  SymUdpFirewall = 7;
  SymmetricEasyInc = 8;
  SymmetricEasyDec = 9;
}

message Ipv4Addr { uint32 addr = 1; }

message Ipv6Addr {
  uint32 part1 = 1;
  uint32 part2 = 2;
  uint32 part3 = 3;
  uint32 part4 = 4;
}

message IpAddr {
  oneof ip {
    Ipv4Addr ipv4 = 1;
    Ipv6Addr ipv6 = 2;
  };
}

message Ipv4Inet {
  Ipv4Addr address = 1;
  uint32 network_length = 2;
}

message Ipv6Inet {
  Ipv6Addr address = 1;
  uint32 network_length = 2;
}

message IpInet {
  oneof ip {
    Ipv4Inet ipv4 = 1;
    Ipv6Inet ipv6 = 2;
  };
}

message Url { string url = 1; }

message SocketAddr {
  oneof ip {
    Ipv4Addr ipv4 = 1;
    Ipv6Addr ipv6 = 2;
  };
  uint32 port = 3;
}

message TunnelInfo {
  string tunnel_type = 1;
  common.Url local_addr = 2;
  common.Url remote_addr = 3;
  common.Url resolved_remote_addr = 4;
}

message StunInfo {
  NatType udp_nat_type = 1;
  NatType tcp_nat_type = 2;
  int64 last_update_time = 3;
  repeated string public_ip = 4;
  uint32 min_port = 5;
  uint32 max_port = 6;
}

message PeerFeatureFlag {
  bool is_public_server = 1;
  bool avoid_relay_data = 2;
  bool kcp_input = 3;
  bool no_relay_kcp = 4;
  bool support_conn_list_sync = 5;
  bool quic_input = 6;
  bool no_relay_quic = 7;
  bool is_credential_peer = 8;
  bool need_p2p = 9;
  bool disable_p2p = 10;
  bool ipv6_public_addr_provider = 11;
}

enum SocketType {
  TCP = 0;
  UDP = 1;
}

message PortForwardConfigPb {
  SocketAddr bind_addr = 1;
  SocketAddr dst_addr = 2;
  SocketType socket_type = 3;
}

message ProxyDstInfo { SocketAddr dst_addr = 1; }

message LimiterConfig {
  optional uint64 burst_rate =
      1; // default 1 means no burst (capacity is same with bps)
  optional uint64 bps = 2; // default 0 means no limit (unit is B/s)
  optional uint64 fill_duration_ms =
      3; // default 10ms, the period to fill the bucket
}

message SecureModeConfig {
  bool enabled = 1; 

  // base64(X25519 private key), used by shared node to present a stable identity
  optional string local_private_key = 2;

  // base64(X25519 public key), required if local_private_key is set
  optional string local_public_key = 3;
}